6" Deringer 20X

 
Alternative Views:


The 6" Deringer 20x Double Check prevents non-health hazard pollutants from entering a potable water supply system when backpressure and/or backsiphonage conditions occur.
    The smallest,
    lightest,
    most economical,
    best performing,
    and only all stainless steel
    backflow preventer. period.
Approvals
Approved in the Horizontal & Vertical Up Position.

Important Note: Install with FLEX Couplings or Flange Adapters Only. DO NOT use RIDGED Couplings!

MSRP: $1,919.00
Pro Price: $1,599.00


Product Code: 6020X


Qty:
Specifications Technology Downloads
 

The Deringer 20x Double Check Valve Assembly is designed to prevent non-health hazard pollutants from entering the potable water supply system caused by backpressure and/or backsiphonage conditions.

Maximum Working Pressure:
175psi (12.1 bar)
Temperature Range:
33° - 140°F (1° - 60°C)
End Connections
- IPS Groove for Steel Pipe:
AWWA C606
- Flange Adapters:
ANSI B16.1 Class 125
Lead Free:
0.25% Maximum by Weight

Flow Performance

Measures & Materials

Valve Housing:
304 Stainless Steel
Valve Cover:
304 Stainless Steel
SOV Disks:
EPDM/304SS:
SOV Shafts:
304 Stainless Steel
SOV Bearings:
Teflon/Bronze
Non Wetted Bolts:
Grade 8 Zinc Plated
Check Disks:
Silicone
Wetted Fasteners:
18-8 Stainless Steel
Check Springs:
17-7 Stainless Steel
Check Pins:
17-7/18-8 Stainless Steel
Check Seats:
Noryl Polymer
O-Rings:
Buna-N

Engineering & Specifications

The Deringer 20x Double Check (DC) valve shall utilize two independent Dual Action Check modules and two integral resiliently seated shut-off valves all of which shall be contained within a single rigid valve housing constructed entirely of 304 stainless steel. Both integral shutoff valves shall include pre-wired supervisory tamper switches contained within a weatherproof actuator housing approved for both indoor and outdoor use. Dual Action Check modules shall operate as a “poppet style” check under low flow conditions, operate as a “swing style” check under high flow conditions and utilize replaceable silicone elastomer sealing discs. Assembly test cocks shall be handle-less and operate via a tamper resistant actuator. Assembly shall have a single full access service port and cover with an “inline” replaceable elastomer seal. Assembly shall be serviceable without special tools and approved for both horizontal and vertical applications.


Average Rating: 5 of 5 Total Reviews: 1 Write a review »

  0 of 0 people found the following review helpful:
 
Sweet Unit September 15, 2017
Reviewer: Greg Thompson from Chesapeake , VA United States  
This backflow is awesome. We replaced an old 6" Hersey DC with this. The Hersey was a beast to get out due to it's massive one piece cast iron body, but installing this little 6" Deriger was a piece of cake. I will definitely purchase more Deringers in the future!!!

Was this review helpful to you?